SABRE-250
10" Bandsaw (66500)
The BS250 has long been one of our best-selling bandsaws and has a solid reputation as being probably the best benchtop bandsaw on the market. Following our development of the SABRE-350 and SABRE-450, we decided to take some of the DNA of these revolutionary new machines and inject it into the BS250, to produce the definitive small bandsaw with premium features and unparalleled performance at this level of the market.
By taking the most relevant features from the existing SABRE series and applying them to the BS250, we believe we have produced the best benchtop bandsaw available on the market below £400 / €500.
In addition, we believe that the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market.
The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.
By taking the most relevant features from the existing SABRE series and applying them to the BS250, we believe we have produced the best benchtop bandsaw available on the market below £400 / €500.
In addition, we believe that the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market.
The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.
Only £399.99
Key Features
Band Wheels
The improved, heavier band wheels give smooth and powerful performance.
Double-Sided Rip Fence Mount
The fence mount design allows the fence to be placed to the right-hand side of the blade, with the fence extrusion secured on the opposite side of the mount. Ideal for supporting timber when cutting with the table at an angle.
Cam-Action Blade Tension Adjustment
Usually found only on larger machines, the strong tensioning system features a cam-action tension release to help make blade change quick and easy.
Easy-Adjust Blade Guides
The spring-loaded blade guides can be adjusted quickly and easily without tools.
Fine Adjustment
The rip fence mount features easily accessible screws for fine adjustment of the fence in relation to the blade, for increased accuracy.
Table
A solid, finely ground cast iron table provides an ideal and low friction work support.
Integral Rip Fence Holder
When the rip fence is not in use it can be stored safely on the side of the machine.
Offset Door Hinges
Even with the bandsaw positioned with the spine against the workshop wall, the offset hinges enable the door to open far enough to give good access for blade changes without the need to take the door off or move the bandsaw away from the wall.
Specifications
Optional Fitments
Pedal Wheel Kit:
Mitre Gauge
Key Features
Tilting Table
Cam-Action Tensioner
Cast Iron Table:
Two Speeds:
Integral Standard Wheel Kit:
Cast Iron Band Wheels:
Integral Legstand:
Mitre Fence Included:
Specifications
Maximum Depth of Cut:
127 mm
Table Size:
350 mm x 318 mm
Motor input P1:
550 W
Blade Length:
70 1/2"
Blade Speed:
460 m/min and 1000 m/min
Weight
35 kg
Throat Depth:
245 mm
Table Height from Floor:
368 mm
Motor output P2:
370 W
Blade Width Capacity:
1/4 - 1/2"
Extraction Port Diameter:
Internal 58.8 mm and External 64.5 mm
Size:
H865 x W525 x D470 mm
AW Stand and Wheel Kit £89.99
BS250
68053 BS250 Mitre Fence £24.99
